Light Duty – Landscaping/Construction
E300 – Light Duty
The ideal system for landscapers: 2″ telescopic roller, pivoting handle, bearing plates, all mounting hardware.
E500 – Heavy-duty system for municipal applications
2″ telescopic roller, pivoting handle, 6″ wide bearing plates, rear section components, all mounting hardware.
E550 – Ideal for Rack and Tubs
2″ telescopic roller in a telescopic housing, pivoting handle, 6″ wide bearing plates, rear section components, all mounting hardware.
E600 – Small Truck Manual System
Spring-loaded 3″ telescopic roller in a telescopic housing, pivoting handle, 6″ wide bearing plates, rear section components (and J hooks), all mounting hardware.
Medium Duty Construction
G1000 – Affordable System For Trucks Up To 15’
Crank handle with brake control pivot arm. 2″ torsion springs.
EDD1000 – Affordable System For Trucks Up To 15’
Spring-loaded 3″ telescopic roller in a telescopic housing, pivoting handle, 6″ wide bearing plates, rear section components (and J hooks), all mounting hardware.
Heavy Duty Construction
G1500 – Manual Direct Drive System
Manual direct drive tarpers for trucks up to 33′
G1500D – Ground Controlled Manual System
Semi-automatic tarpers for trucks up to 33′: Gear reduction chain drive control box, 4″ torsion springs.
EDD1500 – Electric Direct Drive System
Electric direct drive tarpers for trucks up to 33′: Electric direct drive motor, 4″ torsion springs.
A2100 – Air Actuated System
The tarping system that uses the truck’s AIR: Underbody shaft delivers synchronized arm movement. Constant pressure in covered and uncovered position. No external hoses or cylinders. In-cab controls. Aluminum or steel.
DB 20 Fits 12 – 20 Ft’ Bodies, 96″ Wide Hydraulic Actuated Tarping System
- 1/2″ steel laser cut and formed pivot mounts with 5/8″ Teflon lined steel spherical bearings
- Grade 8 bolts and nuts
- Auto reset circuit breakers for pump and switch protection
- Dash mounted toggle switch
- DC motor driven remote pump unit mounted in sealed pump box and attached to the truck chassis
- Pivot arm tubing is ( 1/2″ X 1 1/2″ X 11 gauge) with steel welded ends
- Powder coated parts
- Hydraulic cylinders have a 1 3/4″ bore, 17″ stroke with a 1 1/4″ piston rod (nitrated steel)
- .25/3000 psi hydraulic hose with #4 jic fittings
- 3 1/2 steel torsion tube assembly
- 17oz. RFL cover (asphalt approved). Other material available
- UHMW self-lubricating guides and wedges (high density polypropylene
- Full 100% warranty on parts for two years (excluding cover)
- Also operates with Central Hydraulics
Directions
